Making Your Own L Shaped Desk Installed In The Wall

Dec 24th

An area may be for computer-related tasks and another area may be for writing or other tasks requiring a clutter free space. Melamine is soft and easy to work with, making it ideal for a desk surface by you. The cabinets serve as storage space and also provide the desk legs. Slide a stud finder along the wall in the location you have selected for your desktop.

L Shaped Desk
L Shaped Desk

Mark the location of each pin of the wall with a pencil. Keep table 2 x 2 x 84 inch (5 cm x 5 cm x 2.13 m) horizontally against the wall at the selected location for the desktop. Do it at the height of the upper edge of the table and adjusts its height to be equal to that of metal cabinets.

7 Photos Gallery of: Making Your Own L Shaped Desk Installed In The Wall

Image of: L Shaped Desk
Image of: L Shaped Desk 7
Image of: L Shaped Desk 6
Image of: L Shaped Desk 5
Image of: L Shaped Desk 4
Image of: L Shaped Desk 3
Image of: L Shaped Desk 2
 

A wood screw inserted through the wall plate in each bolt marked with a screw gun to secure it to the same. This is the mounting board. Melamine panel placed on top of the mounting plate on the wall at one end. Wood screws placed through the bottom of the mounting plate on the bottom wall panel melamine every 4 to 6 inches (10 to 15 cm) with a screw gun.

Place the second table of melamine in 24 inches (61 cm) unused table wall mount so that it is perpendicular to the wall to create the L shaped desk. The length of the panel must extend from the wall form the shape of L. Place the screws every 4 inches (10 cm) across the bottom of the mounting plate in the bottom wall of the second panel to secure melamine instead. Slide a filing under the ends of the surface of the L-shaped desk cabinet mounted on the front wall should look out of the wall.

Related :  Ashley Furniture Bedroom Sets for Your Bedroom

The filing of open-ended extension of L must be oriented toward the inner edge of the table for easy access. Metal clamp placed on L on the inner edge below which melamine panels together and form an angle of 90 degrees. Center the bracket between the joint. Drive the screws provided with the bracket through the mounting holes in the bottom of melamine panels with an electric screwdriver.

Leave a Reply